Anatomical Characteristics, Relations, and Clinical Considerations of the Facial Index and Cephalic Index in Young Chileans Aged Between 18 and 21 Years / Características Anatómicas, Relaciones y Consideraciones Clínicas del Índice Facial e Índice Cefálico en Jóvenes Chilenos entre 18 y 21 Años

SUMMARY: Humans throughout history have shown similarities between both their cephalic and facial complexion, among certain ethnic groups, due to genetic and demographic factors. Several studies have demonstrated the different constitutions of specific groups of people in order to generate data of a certain population or group. The present research aims to preliminarily study the existence of possible relations between Cephalic Index and Facial Index among categories of individuals in an odontology student population from a private university in Santiago, Chile. Empirical, descriptive, and cross-sectional study. In this study, 129 students with age range 18-21 were taken as subjects in a non-probabilistic way. Regarding Cephalic Index (CI), the Retzius classification was used, and the Facial Index (FI) was measured considering the maximum height of the face, from nasion to gnathion (Na-Gn), and the maximum width, from right zygion to left zygion (Zr-Zl). In this study, 129 people were taken as sample, 82 females and 47 males. Among women, the most predominant cephalic biotype was brachycephalic (59.8 %), followed by mesocephalic (37.8 %), and dolichocephalic (2.4 %). On the other hand, men's most common biotype was mesocephalic (57.5 %), followed by brachycephalic (36.2 %), and dolichocephalic (6.4 %). Regarding facial biotype, both in female and male subjects the following pattern was shown: euryprosopic (F: 59.7 %, M: 59.6 %), mesoprosopic (F: 26.8 %, M: 29.8 %), and leptoprosopic (F: 13.4 %, M: 10.6 %). Facial parameters of the subjects (odontology students from a Chilean university) tend to be mostly euryprosopic, followed by mesoprosopic and leptoprosopic. Additionally, mesocephalic biotypes tend to be similar to other studies conducted in Chile.

Los seres humanos a lo largo de la historia han mostrado similitudes tanto entre su complexión cefálica como facial, entre ciertos grupos étnicos, debido a factores genéticos y demográficos. Varios estudios han demostrado las diferentes constituciones de grupos específicos de personas para poder generar datos de una determinada población o grupo. La presente investigación tiene como objetivo estudiar preliminarmente la existencia de posibles relaciones entre el Índice Cefálico y el Índice Facial entre categorías de individuos en una población de estudiantes de odontología de una universidad privada de Santiago, Chile, en un estudio empírico, descriptivo y transversal. En este estudio, se tomó como sujetos de forma no probabilística a 129 estudiantes con edades comprendidas entre 18 y 21 años. Respecto al Índice Cefálico (IC), se utilizó la clasificación de Retzius, y el Índice Facial (FI) se midió considerando la altura máxima de la cara, desde nasión hasta gnatión (Na-Gn), y el ancho máximo, desde cigio derecho a izquierdo. cigio (Zr-Zl). En este estudio se tomó como muestra 129 personas, 82 mujeres y 47 hombres. Entre las mujeres, el biotipo cefálico más predominante fue el braquicéfalo (59,8 %), seguido del mesocefálico (37,8 %) y el dolicocéfalo (2,4 %). Por otro lado, el biotipo más común en los hombres fue el mesocefálico (57,5 %), seguido del braquicéfalo (36,2 %) y el dolicocéfalo (6,4 %). Respecto al biotipo facial, tanto en sujetos femeninos como masculinos se mostró el siguiente patrón: euriprosópico (F: 59,7 %, M: 59,6 %), mesoprosópico (F: 26,8 %, M: 29,8 %) y leptoprosópico (F: 13,4 %, M: 10,6 %). Los parámetros faciales de los sujetos (estudiantes de odontología de una universidad chilena) tienden a ser en su mayoría euriprosópicos, seguidos de mesoprosópicos y leptoprosópicos. Además, los biotipos mesocefálicos tienden a ser similares a otros estudios realizados en Chile.

Tratamento da classe III com disjunção maxilar e tração reversa da maxila: relato de caso clínico / Class III treatment weth maxillary disjunction and reverse maxillary traction: clinical case report

Objetivo: A má oclusão classe III de Angle se caracteriza por protrusão mandibular, retrusão maxilar ou pela combinação de ambas. Além de prejudicar a estética facial do paciente, essa má oclusão pode causar alterações funcionais e respiratórias. Uma das alternativas de tratamento para esses casos é o uso da máscara de Petit e do aparelho disjuntor de Hyrax. Este estudo tem como objetivo avaliar por meio da cefalometria ortodôntica se o tratamento com expansão maxilar em conjunto com a tração reversa da maxila diminuem os agravos estéticos e funcionais do paciente Classe III. Relato de caso: o relato de caso descrito no presente trabalho é sobre uma paciente que foi submetida a esse tratamento, sendo descrito por meio de análises cefalométricas, exames radiográficos, fotos intrabucais e achados clínicos. Considerações finais: A verificação dos resultados obtidos após o término do tratamento mostrou que a paciente teve uma boa adesão ao uso desses aparelhos e obteve resultados satisfatórios na sua função mastigatória, na sua oclusão e na sua estética facial e dentária.(AU)

Objective: Angle class III malocclusion is characterized by mandibular protrusion, maxillary retrusion or a combination of both. In addition to impairing the patient's facial aesthetics, this malocclusion can cause functional and respiratory changes. One of the treatment alternatives for these cases is the use of the Petit mask and the Hyrax breaker device. This study aims to evaluate, through orthodontic cephalometry, whether the treatment with maxillary expansion in conjunction with the reverse traction of the maxilla reduces the aesthetic and functional problems of Class III patients. Case report: the case report described in the present work is about a patient who underwent this treatment, being described through cephalometric analysis, radiographic examinations, intraoral photos and clinical findings. Final considerations: The verification of the results obtained after the end of the treatment showed that the patient had a good adherence to the use of these devices and obtained satisfactory results in her masticatory function, in her occlusion and in her facial and dental aesthetics.(AU)

Cephalometric Characteristics in Chilean Latino Population with Normal Occlusion and Harmonic Profiles in Permanent Dentition. A Retrospective Study / Características Cefalométricas en Población Latina Chilena con Oclusión Normal y Perfiles Armónicos en Dentición Permanente. Un Estudio Retrospectivo

SUMMARY: Malocclusion is usually treated based on clinical decisions complemented with a cephalometric analysis, allowing the comparison of an individual with standard reference norms. Cephalometric standards have mostly been obtained from Caucasian population, but may not be appropriate for other ethnic groups, becoming a clinically relevant problem in multicultural and multiracial societies. The present study aimed to establish cephalometric norms for Chilean-Latino population, using a representative sample of class I individuals in permanent dentition. A sample of 72 cephalometric x-rays of class I growing individuals (47 women and 25 men) between 10 and 20 years of age with class I occlusion and harmonic profile was obtained from the records of the Universidad de los Andes taken between 2012 and 2019, including 1164 individuals. The radiographs were classified according to their cervical vertebral maturation status, and cephalometrically analyzed, obtaining vertical and sagittal parameters in soft and hard tissues, which were compared with Caucasian cephalometric norms. The statistical analysis was performed using descriptive and inferential statistics (T-test, ANOVA and Bonferroni tests). Cephalometric norms were obtained for hard and soft tissues. Upon comparison with Caucasian norms, the subjects included in the sample present a tendency towards a convex profile, significant incisal proclination, dental protrusion, labial biprotrusion and an acute nasolabial angle. There are cephalometric differences between the Caucasian cephalometric norms and those observed Chilean Latino population, displaying differences at a hard and soft tissue level that should be taken into account for clinical decision making in Orthodontics.

La maloclusión generalmente se trata con base en decisiones clínicas complementadas con un análisis cefalométrico, lo que permite la comparación de un individuo con normas de referencia estándar. Los estándares cefalométricos se han obtenido en su mayoría de población caucásica, pero pueden no ser apropiados para otros grupos étnicos, convirtiéndose en un problema clínicamente relevante en sociedades multiculturales y multirraciales. El presente estudio tuvo como objetivo establecer normas cefalométricas para población chileno-latina, utilizando una muestra representativa de individuos clase I en dentición permanente. Se obtuvo una muestra de 72 radiografías cefalométricas de individuos en crecimiento clase I (47 mujeres y 25 hombres) entre 10 y 20 años de edad con oclusión clase I y perfil armónico de los registros de la Universidad de los Andes tomados entre 2012 y 2019, incluidas 1164 personas. Las radiografías se clasificaron según su estado de maduración vertebral cervical, y se analizaron cefalométricamente, obteniendo parámetros verticales y sagitales en tejidos blandos y duros, que se compararon con normas cefalométricas caucásicas. El análisis estadístico se realizó mediante estadística descriptiva e inferencial (T-test, ANOVA y pruebas de Bonferroni). Se obtuvieron normas cefalométricas para tejidos duros y blandos. En comparación con las normas caucásicas, los sujetos incluidos en la muestra presentan una tendencia hacia un perfil convexo, proinclinación incisal significativa, protrusión dental, biprotrusión labial y un ángulo nasolabial agudo. Existen diferencias entre las normas cefalométricas caucásicas y las observadas en población latina chilena, mostrando diferencias a nivel de tejidos duros y blandos que se deben considerar para la toma de decisiones clínicas en Ortodoncia.

Changes in the Craniomaxillofacial Growth and Development of Sprague Dawley Rats Subjected to Permanent Experimental Unilateral Nasal Obstruction / Cambios en el Crecimiento y Desarrollo Cráneo Maxilo Facial de Ratas Sprague Dawley Sometidas a Obstrucción Nasal Unilateral Experimental Permanente

SUMMARY: Breathing is considered a vital function dependent on factors such as adequate permeability of the nasal route, which is linked to physiological functions, intellectual processes, and craniofacial growth. The aim of this study was to determine the changes in the craniomaxillofacial growth and bone development of Sprague Dawley rats subjected to permanent experimental unilateral nasal obstruction. Twenty-four newborn rats were used, randomized, and divided into experimental and control groups. The right nostril was obstructed, and weight, length, and Lee's index measurements were recorded at 8 and 16 weeks. Craniomandibular x-rays were taken of each animal, obtaining linear neuro- and viscerocranial measurements. Then, a biochemical analysis was performed to measure the alkaline phosphatase concentration. The results were analyzed in the SPSS software, performing a descriptive analysis, using a t-test for independent samples, comparing basal, cephalometric, and biochemical characteristics between the control and experimental groups, considering a significance range of 5%. When comparing the experimental and control groups, the variables length, weight, and Lee's index presented no significant differences. In the x-ray analysis, at 8 weeks, the Co-L1 and Co-Mn measurements were reduced, whereas the Ba-So increased, with significant differences. At 16 weeks, the L1-O, Po-Ba, and E-Mu measurements decreased; however, Co-Gn registered a greater value with significant differences. The alkaline phosphatase levels fell significantly at week 16 in the experimental group. In conclusion, the reduction of permanent nasal respiratory flow is related to modifications in facial growth at 8 and 16 weeks and to the reduction of alkaline phosphatases at 16 weeks.

La respiración se considera una función vital, dependiente de factores como la permeabilidad adecuada de la vía nasal, vinculada con funciones fisiológicas, procesos intelectuales y crecimiento cráneofacial. El objetivo de este estudio fue determinar los cambios en el crecimiento y desarrollo óseo cráneo maxilo facial de ratas Sprague Dawley sometidas a obstrucción nasal unilateral experimental permanente. Se utilizaron 24 ratas macho neonatas, randomizadas y divididas en grupo control y experimental. Fue realizada obstrucción nasal de la narina derecha y realizadas mediciones de peso, longitud e índice de Lee a las 8 y 16 semanas. Se efectuaron radiografías cráneomandibulares a cada animal, obteniendo medidas lineales de neuro y viscerocráneo. Posteriormente se realizó análisis bioquímico, para medir la concentración de fosfatasa alcalina. Los resultados fueron analizados en el software SPSS, realizándose análisis descriptivo, empleando prueba T para muestras independientes comparando características basales, cefalométricas y bioquímicas entre los grupos control y experimental, considerando un umbral de significancia de 5 %. Al comparar los grupos control y experimental, las variables longitud, peso e índice de Lee no presentaron diferencias significativas. En el análisis radiográfico, a las 8 semanas, las medidas Co-L1 y Co-Mn presentaron reducción, mientras que Ba-So aumentó, con diferencias significativas. A las 16 semanas, las medidas L1-O, Po-Ba y E-Mu disminuyeron, sin embargo, Co-Gn registró un mayor valor, con diferencias significativas. Los niveles de fosfatasa alcalina disminuyeron significativamente en la semana 16 en el grupo experimental. En conclusión, la reducción de flujo respiratorio nasal permanente se relaciona con modificaciones del crecimiento facial a las 8 y 16 semanas y con la reducción de ALK en análisis a las 16 semanas.

Evaluation of Head and Cervical Spine Posture after Therapy with Maxillary Protraction Appliances / Evaluación de la Postura de la Cabeza y la Columna Cervical Después de la Terapia con Aparatos de Protracción Maxilar

SUMMARY: The objective of this study was to evaluate the changes of head and cervical spine posture of skeletal class malocclusion in adolescent with maxillary protraction. Thirty cases of skeletal class malocclusion were randomly selected from the Stomatological Hospital of Shanxi Medical University. High-quality lateral cephalograms were collected including pre- and posttreatment to compare the changes of head and cervical spine posture. Data were processed using SPSS 26.0 statistical software. The paired-t test was used to compare pre- and posttreatment mean angular measurements.A significant difference in the SNA(p<0.001), SNB(p<0.01), and ANB(p<0.001) between T1 and T2 showed an improvement in the sagittal relationships. A significant change was observed in middle cervical spine posture, while upper cervical spine posture variables showed no significant difference after treatment. Skeletal class with maxillary protraction appliance not only led to the improvement of sagittal relationship, but also changed the middle cervical spine posture.

El objetivo de este estudio fue evaluar los cambios en la postura de la cabeza y la columna cervical debido a la maloclusión clase esquelética en adolescentes con protracción maxilar. Treinta casos de maloclusión de clase esquelética fueron seleccionados al azar del Hospital Estomatológico de la Universidad Médica de Shanxi. Se recogieron cefalogramas laterales de alta calidad, incluidos el tratamiento previo y posterior, para comparar los cambios en la postura de la cabeza y la columna cervical. Los datos se procesaron con el software estadístico SPSS 26.0. Se utilizó la prueba t pareada para comparar las medidas angulares medias antes y después del tratamiento. Una diferencia significativa en SNA (p <0,001), SNB (p <0,01) y ANB (p <0,001) entre T1 y T2 mostró una mejora en las relaciones sagitales. Se observó un cambio significativo en la postura de la columna cervical media, mientras que las variables de postura de la columna cervical superior no mostraron diferencias significativas después del tratamiento. La clase esquelética con aparato de protracción maxilar no solo condujo a la mejora de la relación sagital, sino que también cambió la postura de la columna cervical media.

Concordance of the vestibular bone thickness at the level of point a between teleradiography and cone beam computed tomography / Concordancia del espesor óseo vestibular a nivel del punto a entre telerradiografía y tomografía computarizada de haz cónico

Objective: The aim of this study was to determine the concordance of the vestibular bone thickness measured at the level of point A between Teleradiography and Cone Beam Computed Tomography (CBCT). Materials and Methods: This study consisted of a cross-sectional analytical design of concordance that evaluated the teleradiographies and CBCTs of 32 patients. The measurements were performed by three evaluators, specialists in orthodontics. Two of them measured the CBCTs and one evaluated the teleradiographs. The concordance of both tests was determined using the Concordance Correlation Coefficient. Results: When evaluating the value of the vestibular bone thickness at the level of point A between the CBCT and the teleradiography, it was observed that the mean value of the absolute difference between the two was 0.95±0.74, 95%CI [0.68­1.22], being statistically significant (p=0.0027). When the concordance between both tests was analyzed, it was observed that it was poor (CCC=0.204 95%CI [0.014­0.394]), although statistically significant (p<0.00001). Conclusions: It was possible to conclude that there is no concordance in the measurement of the vestibular bone thickness at the level of Point A between the Teleradiography and the CBCT.

Objetivo: El objetivo de este estudio fue determinar la concordancia del espesor óseo vestibular medido a nivel del punto A entre la Telerradiografía y la Tomografía computarizada de haz cónico (CBCT). Materiales y Métodos: Esta investigación presentó un diseño analítico transversal de concordancia en el que se evaluaron las telerradiografías y CBCT de 32 pacientes. Las mediciones fueron realizadas por tres evaluadores especialistas en ortodoncia, dos de ellos midieron los CBCT y uno las telerradiografías. La concordancia de ambos exámenes fue medida mediante Coeficiente de Correlación de Concordancia. Resultados: Al evaluar el valor del grosor óseo vestibular a nivel del punto A entre el CBCT y la telerradiografía, se observó que el valor promedio de diferencia absoluta entre ambos fue de 0,95±0,74 IC95% [0,68­1,22], siendo estadísticamente significativas (p=0,0027). Cuando se analizó la concordancia entre ambos exámenes se observó que esta fue pobre (CCC=0,204 IC95 % [0,014­0,394]), aunque estadísticamente significativa (p<0,00001). Conclusión: Se pudo concluir que no existe concordancia en la medición del espesor óseo vestibular medido a nivel del Punto A entre la Telerradiografía y el CBCT.

Relationship between the occlusal plane and three different levels of ala-tragus line in a sample of sudanese adults / Relación entre el plano oclusal y tres niveles diferentes de la línea ala-trago en una muestra de adultos sudaneses

Aim: Correct orientation of the occlusal plane plays a vital role in achieving the perfect occlusal balance and function of complete dentures. This study aimed to evaluate the most reliable posterior reference point of the ala-tragus line (ATL) concerning occlusal plane (OP) in a sample of the dentate Sudanese population. Materials and Methods: A total of 150 subjects with healthy and well-aligned permanent teeth were randomly selected. Right lateral profile photographs were taken with subjects having a fox plane placed intra-orally, contacting the occlusal plane. Reference points corresponding to inferior, middle, and superior borders of the tragus and inferior border of the ala of the nose were marked on photographs. The angles between the lines were measured using the Auto-CAD software program, and the most parallel relationship was determined. Descriptive statistics in terms of means and standard deviations were presented. Independent t-test and one-way ANOVA tests were used to compare as appropriate. A p-value < 0.05 was considered significant. Results: The mean angle formed by the OP and ATL was 8.5±3.69º for the superior level, 4.68±3.13º for the middle line, and 2.89±2.57º for the inferior line. A significant difference was found between the means of the three angles (p< 0.001), while no significant difference (p> 0.05) was found between both genders regarding the measured angles. Conclusions: The line joining the inferior border of the ala of the nose with the inferior border of the tragus of the ear was the most reliable line in terms of parallelism to determine the occlusal plane orientation.

Antecedentes: La orientación correcta del plano oclusal juega un papel vital para lograr el equilibrio oclusal perfecto y la función de las prótesis completas. Este estudio tuvo como objetivo evaluar el punto de referencia posterior más confiable de la línea ala-trago (ATL) con respecto al plano oclusal (OP) en una muestra de la población dentada de Sudán. Materiales y Métodos: Se seleccionaron aleatoriamente un total de 150 sujetos con dientes permanentes sanos y bien alineados. Se tomaron fotografías de perfil lateral derecho de sujetos a los que se les colocó un plano de zorro intraoralmente, en contacto con el plano oclusal. En las fotografías se marcaron los puntos de referencia correspondientes a los bordes inferior, medio y superior del trago y al borde inferior del ala de la nariz. Los ángulos entre las líneas se midieron utilizando el programa de software Auto-CAD y se determinó la relación más paralela. Se presentaron estadísticas descriptivas en términos de medias y desviaciones estándar. Se utilizaron prueba-t independiente y prueba ANOVA unidireccional para las comparaciones, según correspondiera. Se consideró significativo un valor de p<0,05. Resultados: El ángulo medio formado por OP y ATL fue de 8,5±3,69º para el nivel superior, 4,68±3,13º para la línea media y 2,89±2,57º para la línea inferior. Se encontró una diferencia significativa entre las medias de los tres ángulos (p< 0,001), mientras que no se encontró diferencia significativa (p>0,05) entre ambos sexos con respecto a los ángulos medidos. Conclusión: La línea que une el borde inferior del ala de la nariz con el borde inferior del trago de la oreja fue la línea más confiable en términos de paralelismo para determinar la orientación del plano oclusal.

Caracterización epidemiológica, clínica y cefalométrica del brote anormal de los terceros molares / Epidemiological, clinical and cephalometric characterization of the abnormal eruption of third molars

Introducción: El brote de los terceros molares es un proceso que no está del todo explicado, pero durante su erupción puede provocar diferentes accidentes o complicaciones. Objetivo: Caracterizar el brote anormal de los terceros molares según variables epidemiológicas, clínicas y cefalométricas. Método: Se realizó un estudio observacional, descriptivo y transversal en la Clínica Estomatológica Provincial Docente «Mártires del Moncada», de Santiago de Cuba, desde noviembre de 2019 a febrero de 2020. La población estuvo conformada por jóvenes de 18 a 25 años de edad; la muestra fue seleccionada por muestreo aleatorio simple. Se tuvieron en cuenta las siguientes variables: sexo, color de la piel, brote anormal y otras variables cefalométricas. Resultados: De los 84 dientes incluidos en el estudio, se detectaron 66 terceros molares con brote anormal (78,6 %). El promedio asociado al brote de estos molares de espacio óseo superior insuficiente fue igual para los superiores con medias de 25,9 mm; el de angulación inadecuada resultó obtuso en el superior izquierdo con 128,3º y agudo en los inferiores derechos con 58,8º; asimismo el mayor diámetro mesiodistal inadecuado fue el de los inferiores derechos con 15,7 mm. Conclusiones: El brote anormal de los terceros molares se caracteriza por afectar, de forma importante, a féminas y a individuos mestizos. Su observación se singulariza, fundamentalmente, en molares inferiores con espacios óseos posteriores reducidos, mesioangulaciones y diámetros mesiodistales considerables.

Introduction: eruption of the third molars is a process that is not fully explained in the literature; however it is known that their eruption can cause different complications. Objective: to characterize the abnormal eruption of third molars according to epidemiological, clinical and cephalometric variables. Methods: an observational, descriptive and cross-sectional study was carried out at "Mártires del Moncada" Provincial Teaching Dental Clinic, in Santiago de Cuba, from November 2019 to February 2020. The population consisted of young people aged 18-25 years; the sample was selected by simple random sampling. Gender, skin color, abnormal eruption and other cephalometric variables were taken into account. Results: sixty-six third molars with abnormal eruption were detected from the 84 teeth included in the study (78.6%). The average associated with the eruption of these molars with insufficient upper bone space was the same for the upper ones with means of 25.9 mm; the average with inadequate angulation was obtuse in the upper left third molar with 128.3º and the acute one in the lower right third molars with 58.8º; the lower right third molars likewise had the largest inadequate mesiodistal diameter with 15.7 mm. Conclusions: the abnormal eruption of third molars is characterized by significantly affecting females and mixed-race individuals. Its observation is singled out, fundamentally, in lower molars with reduced posterior bone spaces, mesioangulations and considerable mesiodistal diameters.

Evaluation of the normal craniocervical junction craniometry in 137 asymptomatic patients / Evaluación de la craneometría de la unión craneocervical normal en 137 pacientes asintomáticos

SUMMARY: To our best knowledge, most of the craniometric studies on the normal craniocervical junction (CCJ), are still poorly studied and based on measurements taken from plain radiographs. In this study, the authors conducted a craniometric evaluation of the CCJ in a population without known CCJ abnormalities. The purpose of the study was to assess the normal CCJ craniometry based on measures obtained from CT scans. The authors examined 137 consecutive CCJ CT scans obtained in patients evaluated at their hospital for treatment of non-CCJ conditions between 2018 and 2019. Twelve craniometrical dimensions were conducted, including the relation of the odontoid with the cranial base, the atlantodental interval (ADI), the clivus length, and the clivus-canal angle (CCA).

Hasta donde sabemos, aun son escasos y pocos los estudios craneométricos respecto a la unión craneocervical normal (UCCN) y estos se basan en mediciones tomadas de radiografías simples. En este estudio, realizamos una evaluación craneométrica de la UCCN en una población sin anomalías conocidas. El propósito del estudio fue evaluar la craneometría UCCN normal en función de las medidas obtenidas de las tomografías computarizadas. Los autores examinaron 137 tomografías computarizadas UCCN consecutivas obtenidas en pacientes evaluados en su hospital para el tratamiento de condiciones no UCCN entre los años 2018 y 2019. Se realizaron doce dimensiones craneométricas, incluida la relación del proceso odontoides con la base del cráneo, el intervalo atlantodental (ADI), la longitud del clivus y el ángulo clivus-canal (CCA).

Class I and Class II Patients Treated with Damon System: A Study of Transversal, Sagittal and Torque Values Variations

ABSTRACT Objective: To analyze the transversal and anterior-posterior changes obtained in patients treated only with the Damon system. Material and Methods: 51 patients with either class I or class II division 1 sagittal relationship treated with the Damon system and the same archwire sequence were retrospectively selected. Dental casts of each patient before (T0) and after treatment (T1) were scanned and analyzed using NEMOCAST 3D software. Inter-molar, inter first-premolar, inter-second premolar and inter-canine distances were measured in both upper and lower arches. Initial and final lateral cephalograms were traced using the OrisCeph program. Pre and post-treatment measurements were compared using the t-test for repeated measurements. The Pearson Correlation Index and Linear Regression Analysis were used to determine the dependence between continuous variables. The significance level was set at 0.05. Results: Transversal diameters in the upper arch increase statistically significantly, especially in the bicuspid area. Initial intra-arch diameter was the only statistically significant variable correlated with the final expansion obtained. A linear negative correlation between the initial latero-posterior torque and the final expansion was observed in both arches. Conclusion: Using identical arches in patients with very different initial characteristics, the changes in bicuspids' diameters remain the most predominant. Patients with initial more negative torque in the posterior region had a higher expansion amount.

Mandibular advancement with clear aligners and functional appliances in the treatment of skeletal ClassⅡmalocclusion: a systematic review and meta-analysis / 华西口腔医学杂志

OBJECTIVES@#This study aimed to conduct a meta-analysis of the efficacy of mandibular advance clear alig-ners with traditional functional appliances as the control group.@*METHODS@#PubMed, Web of Science, Embase, Cochrane Library, China Biomedical Abstracts Database, China Knowledge Network Database, Wanfang Database, and Weipu Database were used in this study. The two groups of researchers screened the literature and extracted data based on the inclusion and exclusion criteria established by PICOS entries, and used the ROBINS-I scale for quality evaluation. Revman 5.4 and Stata 17.0 software were used for meta-analysis.@*RESULTS@#Nine clinical controlled trials were included in this study with a total sample size of 283 cases. No significant difference was found in SNA, SNB, ANB, Go-Pog, U1-SN, Overjet, and other aspects between the invisible group and the traditional group in the treatment of skeletal class Ⅱ ma-locclusion patients; there was a 0.90° difference in mandibular plane angle between the two groups; the growth of the mandibular ramus (Co-Go) in the traditional group was 1.10 mm more than that in the invisible group; the lip inclination of the lower teeth in the invisible group was better controlled, 1.94° less than that in the control group.@*CONCLUSIONS@#The invisible group can better control the lip inclination of the mandibular anterior teeth when guiding the mandible. Furthermore, the mandibular plane angle (MP-SN) can remain unchanged, but the growth of the mandibular ramus is not as good as the traditional group, and auxiliary measures should be taken to improve it in clinical practice.

Imaging study on the relationship between anterior and posterior occlusal planes and temporomandibular osteoarthrosis / 华西口腔医学杂志

OBJECTIVES@#The aim of this study was to compare the anterior and posterior occlusal plane characteristics of patients with different temporomandibular joint osseous statuses.@*METHODS@#A total of 306 patients with initial cone beam CT (CBCT) and cephalograms were included. They were divided into three groups on the basis of their temporomandibular joint osseous status: bilateral normal (BN) group, indeterminate for osteoarthrosis (I) group, and osteoarthrosis (OA) group. The anterior and posterior occlusal planes (AOP and POP) of the different groups were compared. Then, the regression equation was established after adjusting for confounding factors, and a correlation analysis between the occlusion planes and other parameters was performed.@*RESULTS@#SNA, SNB, FMA, SN-MP, Ar-Go, and S-Go were correlated with the occlusal planes. Relative to the BN and I groups, the FH-OP of the OA group increased by 1.67° on the average, FH-POP increased by 1.42° on the average, and FH-AOP increased by 2.05° on the average.@*CONCLUSIONS@#The occlusal planes were steeper in the patients with temporomandibular osteoarthrosis than in the patients without it, and the mandible rotated downward and backward. The height of the mandibular ramus, the mandibular body length, and the posterior face height were small. In clinical practice, attention should be given to the potential risk of temporomandibular joint osteoarthrosis in such patients. In addition, SNB, FMA, SN-MP, Ar-Go, S-Go, and occlusal planes had moderate correlations.

Breastfeeding practices and head circumference in young children: a systematic review

ABSTRACT OBJECTIVE To review observational studies on the association between breastfeeding (BF) practices and head circumference (HC) of children < 2 years old. METHODS A systematic review was conducted using the following electronic databases of health sciences: PubMed, Latin American and Caribbean Literature in Health Sciences (Lilacs), Web of Science and Scopus. We selected observational studies published in any language from January 01, 2010 to November 19, 2021, from different populations that investigated the association between BF practice and HC among healthy children < 2 years old. Titles and abstracts were screened independently by two evaluators. RESULTS From the 4,229 articles identified, 24 were included in this review: 6 cross-sectional, 17 longitudinal, and 1 case-control. The studies varied in their definition of the variables for BF and in reporting its practice, frequency, duration, and feeding method. Regarding HC, the authors analyzed the mean differences, abnormal values (z-score above + 2SD or below -2SD according to the World Health Organization (WHO) growth standards, 2007), and longitudinal growth parameters. The findings of this review suggest that BF may have a positive relationship with HC at the beginning of life. CONCLUSIONS Our findings suggest that BF, especially exclusive BF, may play a protective role against abnormal HC values in young children. However, more robust evidence with standardized BF indicators and WHO growth standards (2007) are required.

Automated diagnostic classification with lateral cephalograms based on deep learning network model / 中华口腔医学杂志

Objective: To establish a comprehensive diagnostic classification model of lateral cephalograms based on artificial intelligence (AI) to provide reference for orthodontic diagnosis. Methods: A total of 2 894 lateral cephalograms were collected in Department of Orthodontics, Capital Medical University School of Stomatology from January 2015 to December 2021 to construct a data set, including 1 351 males and 1 543 females with a mean age of (26.4± 7.4) years. Firstly, 2 orthodontists (with 5 and 8 years of orthodontic experience, respectively) performed manual annotation and calculated measurement for primary classification, and then 2 senior orthodontists (with more than 20 years of orthodontic experience) verified the 8 diagnostic classifications including skeletal and dental indices. The data were randomly divided into training, validation, and test sets in the ratio of 7∶2∶1. The open source DenseNet121 was used to construct the model. The performance of the model was evaluated by classification accuracy, precision rate, sensitivity, specificity and area under the curve (AUC). Visualization of model regions of interest through class activation heatmaps. Results: The automatic classification model of lateral cephalograms was successfully established. It took 0.012 s on average to make 8 diagnoses on a lateral cephalogram. The accuracy of 5 classifications was 80%-90%, including sagittal and vertical skeletal facial pattern, mandibular growth, inclination of upper incisors, and protrusion of lower incisors. The acuracy rate of 3 classifications was 70%-80%, including maxillary growth, inclination of lower incisors and protrusion of upper incisors. The average AUC of each classification was ≥0.90. The class activation heat map of successfully classified lateral cephalograms showed that the AI model activation regions were distributed in the relevant structural regions. Conclusions: In this study, an automatic classification model for lateral cephalograms was established based on the DenseNet121 to achieve rapid classification of eight commonly used clinical diagnostic items.

Implications of occlusal plane in diagnosis and treatment of malocclusion / 浙江大学学报·医学版

Occlusal plane (OP) is one of the essential factors affecting craniofacial morphology and function. The OP not only assists in diagnosing malocclusion but also serves as an important reference for making treatment plans. Patients with different types of malocclusions have different forms of OP. Compared with patients with standard skeletal facial type, the occlusal plane of patients with skeletal class Ⅱ and high angle is steeper, while that of patients with skeletal class Ⅲ and low angle is more even. In orthodontic treatment, adjusting and controlling the OP can promote the normal growth and development of the mandible in most patients with malocclusion during the early stage of growth, while causing favorable rotation of the mandible in some adults with mild-to-moderate malocclusion. For moderate-to-severe malocclusion, the OP rotation by orthodontic-orthognathic treatment can achieve better long-term stability. This article reviews the evolution of the definition of OP and its implications for diagnosing and the guiding treatment of malocclusion.

Establishing Cephalometric Norms in Primary Dentition Using Comprehensive Craniofacial Growth Analysis - A Digital Cephalometric Study

ABSTRACT Objective: To establish cephalometric norms in primary dentition among males and females using novel customized Comprehensive Cephalometric Growth (CCG) Analysis. Material and Methods: The study was conducted on 67 subjects with a mean age of 5.5 yrs. Digital lateral cephalometric radiographs were obtained using Planmeca Pro One. The digital images were then transferred to Nemoceph software. Craniofacial Growth (CCG) Analysis was configured in the software with five sub-groups. This sub-grouping was done such that related components were grouped together and comprehensively; it would provide an assessment of every component of the craniofacial region that could be affected either by treatment maneuver or growth process. The same was used for the cephalometric analysis and to determine the cephalometric norms in the primary dentition. Results: Certain linear measurements were higher among males when compared to females. However, most measurements remained similar among males and females during this age group. The CCG analysis provided a comprehensive knowledge of the craniofacial parameters during the growth process. Conclusion: The cephalometric norms during primary dentition thus established using Comprehensive Craniofacial Growth analysis would provide the data for early diagnosis and treatment planning in interceptive orthodontic treatment procedures.

Identificación del biotipo facial mediante fotografía vs. radiografías laterales de cráneo. Revisión de literatura / Identification of the facial biotype by photography versus lateral skull radiography. Literature review

Objetivo: reconocer la eficacia de la identificación del biotipo facial mediante fotografía vs. radiografías laterales de cráneo. Materiales y métodos: se realizó un estudio de tipo descriptivo, retrospectivo de la literatura. Para ello se consultaron bases de datos electrónicas, como PubMed, ScienceDirect, Lilacs, Epistemonikos, Sage, Healey Library, Scielo y Google Scholar. Las palabras clave utilizadas fueron: photographs; extraoral photographs; cephalometry; lateral cephalograms; facial biotypes; brachyfacial; mesofacial; dolichofacial. La búsqueda se restringió a artículos en inglés, español y portugués publicados desde el año 2017 hasta el año 2022. Resultados: el biotipo facial permite determinar las características morfológicas y funcionales relacionadas con la dirección en la cual el macizo craneofacial crece y se desarrolla. Existen varios métodos que posibilitan la identificación del biotipo facial. En la actualidad hay diversos tipos de software que, mediante fotografías digitales de las dimensiones y proporciones faciales, permiten identificar el biotipo facial; no obstante, el estándar de oro para la determinación del biotipo facial son las radiografías laterales de cráneo, en las que, por medio de un sistema de trazos, se logra la identificación del biotipo. Este es un método que demanda mayores conocimientos teóricos-anatómicos, por lo que, en la mayoría de los casos, los resultados son más precisos. Sin embargo, al ser ambas técnicas "operador-dependiente", la veracidad de los resultados dependerá en gran medida de los conocimientos, las habilidades y las destrezas de cada profesional. Conclusión: tanto las fotografías digitales como las radiografías laterales del cráneo permiten la identificación del biotipo facial. La precisión de su resultado dependerá, en gran medida, de las habilidades, las destrezas y los conocimientos del profesional, tanto de la técnica como de sus conocimientos básicos de anatomía y radiología.

Objective: To recognize the efficacy of facial biotype identification by photography vs. lateral skull radiographs. Materials and methods:A descriptive, retrospective study of the literature was carried out, for which electronic databases such as PubMed, Science Direct, Lilacs, Epistemonikos, Sage, Healey Library, Scielo and Google Scholar were consulted. The keywords used were: photographs; extraoral photographs; cephalometry; lateral cephalograms; facial biotypes; brachyfacial; mesofacial; dolichofacial. The search was restricted to articles in English, Spanish, and Portuguese published from 2018 to 2022. Results: The facial biotype allows the determination of the morphological and functional characteristics related to the direction in which the craniofacial massif grows and develops. There are several methods that allow the identification of the facial biotype, currently there are different types of software that allow the analysis through digital photographs of the dimensions and facial proportions that allow the identification of the facial biotype; However, the gold standard for determining the facial biotype are lateral skull radiographs, in which biotype identification is achieved by means of a trace system, being a method that demands greater theoretical-anatomical knowledge, therefore that the results in most cases are more precise, however, as both techniques are "operator dependent", the veracity of the results found to a great extent on the knowledge, abilities and skills of each professional. Conclusion: Both digital photographs and lateral skull radiographs allow the identification of the facial biotype, the accuracy of the result will depend mainly on the skills, abilities, and knowledge of the professional, both the technique and of his basic understanding of anatomy and radiology.

Mandibular angle morphology in open bite subjects according to the skeletal relationship: a cbct short report / Morfología del ángulo mandibular en sujetos con mordida abierta de acuerdo a la relación esquelética: un informe breve en cbct

Aim: The purpose of this research was to three-dimensionally evaluate the mandibular angle morphology in open bite subjects with different sagittal skeletal relationships. Material and Methods: Cone beam computed tomography (CBCT) images of 26 subjects (12 men and 14 women) with anterior open bite were evaluated. The sample included 3 groups categorized by their sagittal skeletal relationship (based on ANB angle and anteroposterior dysplasia indicator (APDI)): Class I (n=9), Class II (n=6) and Class III (n=11). The total gonial angle, upper gonial angle, lower gonial angle, intergonial width, interantegonial width and antegonial notch depth were measured. ANOVA and Tukey tests were used for intergroup comparison. The Kruskal Wallis test was also used when necessary. In addition, the Pearson correlation coefficient was calculated to evaluate significant correlations between overbite and antegonial notch depth with gonial angle, Frankfurt mandibular plane angle (FMA) and the palatal plane-mandibular plane (PP-MP). Results: A significant difference was only found on the upper gonial angle between Class II and Class III (p=0.047). The upper gonial angle showed greater values (48°±3°) with the mandibular branch toward backward in Class III subjects and lower values (42.42°±4.39°) with the mandibular ramus leaning forward in subjects with Class II skeletal relationship. Besides, only a statistically significant correlation was found between overbite and the lower gonial angle (r=-0.418, p=0.034). Conclusion: Mandibular angle morphology is similar in anterior open bite subjects with different sagittal skeletal relationships, except for the upper gonial angle which is increased in Class III and decreased in Class II subjects with open bite. Lower gonial angle is negatively correlated with overbite. This difference should be considered by orthodontists when planning their treatments.

Objetivo: El propósito de esta investigación fue evaluar tridimensionalmente la morfología del ángulo mandibular en sujetos de mordida abierta con diferentes relaciones esqueléticas sagitales. Material y Métodos: Se evaluaron imágenes de tomografía computarizada de haz cónico (CBCT) de 26 sujetos (12 hombres y 14 mujeres) con mordida abierta anterior. La muestra incluyó 3 grupos categorizados por su relación esquelética sagital (según el ángulo ANB y el indicador de displasia anteroposterior (APDI)): Clase I (n=9), Clase II (n=6) y Clase III (n=11). Se midieron el ángulo goniaco total, el ángulo goniaco superior, el ángulo goniaco inferior, el ancho intergonial, el ancho interantegonial y la profundidad de la entalladura antegonial. Se utilizaron las pruebas ANOVA y Tukey para la comparación intergrupal. La prueba de Kruskal Wallis también se utilizó cuando fue necesario. Además, se calculó el coeficiente de correlación de Pearson para evaluar correlaciones significativas entre la sobremordida y la profundidad de la entalladura antegonial con el ángulo goniaco, el ángulo del plano mandibular de Frankfurt (FMA) y el plano palatino-plano mandibular (PP-MP). Resultados: Solo se encontró una diferencia significativa en el ángulo goniaco superior entre la Clase II y la Clase III (p=0.047). El ángulo gonial superior mostró valores mayores (48°±3°) con la rama mandibular hacia atrás en sujetos Clase III y valores más bajos (42,42°±4,39°) con la rama mandibular inclinada hacia adelante en sujetos con Clase II esquelética relación. Además, solo se encontró una correlación estadísticamente significativa entre la sobremordida y el ángulo goniaco inferior (r= -0,418, p= 0,034). Conclusión: La morfología del ángulo mandibular es similar en sujetos con mordida abierta anterior con diferentes relaciones esqueléticas sagitales, excepto por el ángulo goniaco superior que aumenta en la Clase III y disminuye en sujetos de Clase II con mordida abierta. El ángulo gonial inferior se correlaciona negativamente con la sobremordida. Los ortodoncistas deben considerar esta diferencia al planificar sus tratamientos.